Aluminum Extrusion Press Price in 2026: What Really Drives the Cost
Why There Is No Single "Aluminum Extrusion Press Price"
Ask ten manufacturers for an aluminum extrusion press price and you will get ten different answers. A 630-ton press and a 2,500-ton press are different machines, not different sizes of the same machine. The frame steel, cylinder blocks, pump capacity, and control system all scale with the press, and that is before you add billet loading, run-out tables, and die handling. In 2026 the question buyers should ask is not "how much does it cost" but "what drives the cost and what am I actually paying for". This guide breaks down every major price driver so you can compare quotes from different suppliers on a like-for-like basis.
1. The Five Biggest Drivers of Extrusion Press Price
1.1 Rated tonnage (extrusion force)
Tonnage is the single largest cost driver. The rated extrusion force determines the weight of the main frame, the size of the main cylinder and oil tanks, and the volume of the hydraulic system. In the JY series, rated extrusion force runs from 6,300 KN (630 ton) to 25,000 KN (2,500 ton). Moving up the range means more forged steel, larger castings, and a heavier foundation, so the price difference between a 630-ton and a 2,500-ton press is substantial, and it is justified by real structural differences, not by margin.
1.2 Billet size and barrel diameter
The barrel inner hole diameter decides the maximum billet cross-section the press can accept. A larger barrel bore, such as Dia. 205-265 mm on the JY-2500, allows bigger billets and longer effective lengths, which improves yield per cycle. Because the container and its liner are precision parts made from high-alloy steel, larger barrels add directly to material and machining cost.
1.3 Automation and control level
Modern extrusion presses run on PLC control with touch-screen operation. The JY series uses Mitsubishi touch screens, Schneider electrical components, and Rexroth hydraulic pumps. Higher automation means faster setup, repeatable extrusion speed, and fewer operator errors, and it is one of the few cost drivers that pays you back on every shift.
1.4 Double action and extrusion mode
Presses with double action (a separate piercing system) support hollow profiles with a moving or fixed mandrel, and both forward and backward extrusion. If your product mix includes tubes or hollow sections, this capability matters more than a small difference in base price.
1.5 Line integration and accessories
The press itself is only the center of the line. A complete cell typically includes a billet loader, run-out table, puller, hot saw, quench system, and die heater. The scope of these add-ons is where quotes diverge most, so always compare the full scope, not just the press frame.
See the full Aluminum Extrusion Press range with these configurations on our product page.
2. How Tonnage Maps to Price: The JY Series Reference Table
The JY series is a good reference for how specifications scale with price. The model number equals the nominal tonnage, and the rated extrusion force, locking force, perforation force, motor power, and barrel size all grow together. Use this table to shortlist the press that matches your output, then request a customized quotation for that exact model.
| Model | Rated Extrusion Force (KN) | Fixed Work Stress (MPa) | Locking Force (KN) | Perforation Force (KN) | Extruding Speed (mm/s) | Main Motor Power (KW) | Barrel Inner Hole (mm) | Host Dimensions (L x W x H, m) |
|---|---|---|---|---|---|---|---|---|
| JY-630 | 6300 | 21 | 633 | 1030 | 40 | 75 KW x3 | Dia. 85-115 x 500 | 6.8 x 2.3 x 2.8 |
| JY-800 | 8000 | 21 | 633 | 1030 | 50 | 132 KW x3 | Dia. 105-135 x 550 | 9.2 x 2.3 x 3.1 |
| JY-1000 | 10000 | 21 | 800 | 1293 | 40 | 132 KW x3 | Dia. 125-135 x 600 | 10 x 2.4 x 3.3 |
| JY-1250 | 12500 | 21 | 800 | 1293 | 50 | 132 KW x4 | Dia. 135-165 x 650 | 11.5 x 2.5 x 3.4 |
| JY-1630 | 16300 | 21 | 1586 | 2500 | 40 | 132 KW x5 | Dia. 155-205 x 750 | 13.5 x 4.2 x 4.1 |
| JY-1800 | 18000 | 21 | 1586 | 2800 | 40 | 132 KW x6 | Dia. 175-225 x 800 | 14.5 x 4.2 x 4.1 |
| JY-2200 | 22000 | 21 | 1586 | 3000 | 40 | 132 KW x7 | Dia. 195-245 x 900 | 15.5 x 4.7 x 4.5 |
| JY-2500 | 25000 | 21 | 1586 | 3500 | 40 | 132 KW x8 | Dia. 205-265 x 1000 | 18 x 5 x 4.8 |
The JY-630 through JY-2500 models share the same four-column horizontal structure with a top-mounted oil tank, stable 21 MPa working pressure, and extrusion speed of 40-50 mm/s. Because the platform is standardized, your quotation reflects the specific model, automation level, and accessories rather than a generic price list.
3. The Costs Beyond the Press Itself
Buyers who compare only machine prices often miss a large share of the real project cost:
Foundation and civil works: a 2,500-ton press needs a reinforced foundation sized for its dynamic load.
Installation and commissioning: alignment, hydraulic flushing, and trial runs by a factory engineer.
Tooling and dies: container liner, mandrels, and the first die sets for your profile shapes.
Operator and maintenance training: so your team can run and service the line safely.
Spare parts and consumables: seals, filters, and hydraulic oil for the first year.
A responsible supplier lists these items in the quotation so there are no surprises at delivery.
4. Why We Quote Per Project, Not Per Price List
At Dalian Jiuying (brand J&Y), every extrusion press is customized to the buyer's billet size, alloy, output target, and plant layout. That is why we do not publish a fixed price list for the aluminum extrusion press. The same JY-1250 model can be quoted differently depending on automation level, double-action configuration, and line accessories. Publishing a generic number would mislead buyers, so we ask for your production parameters first and return a project-based quotation. You always receive the price that matches the machine you will actually receive.
5. How to Get an Accurate Quote in 4 Steps
Define your output: profile shapes, alloys, and target tons per year.
Confirm your billet: billet diameter and length, or the barrel size you prefer.
Choose automation: basic PLC operation or a fully integrated cell.
Share your site: floor plan and power supply, so we can include layout and installation advice.
With these four inputs we can recommend a specific JY model and send a detailed quotation. For related equipment, our Aluminum Melting Furnace and Copper Extrusion Press pages cover the rest of the line.
6. Frequently Asked Questions
How much does an aluminum extrusion press cost in 2026?
Every J&Y press is customized, so we quote per project instead of publishing a fixed price. The cost depends mainly on rated tonnage, barrel size, automation level, and line accessories. Send us your billet size and output target, and we will return a project-based quotation.
Why do extrusion press prices vary so much between manufacturers?
Quotes differ because specifications differ: tonnage, barrel diameter, control system, hydraulic component brands, and the scope of auxiliary equipment. Comparing like-for-like specifications, not just base prices, is the only reliable way to evaluate suppliers.
Does a bigger tonnage press always cost proportionally more?
Generally yes. Higher rated force means heavier frames, larger cylinders, and bigger pumps, so cost rises with tonnage. But the right press for your plant is the one matched to your billet size and profile output, not simply the biggest one you can afford.
What is included in a J&Y extrusion press quotation?
Our quotation covers the press itself, hydraulic and control systems, installation and commissioning guidance, operator training, and a recommended spare parts list. We also provide a free plant layout drawing so you can plan the workshop before delivery.
Can I get a plant layout and quotation before I order?
Yes. Share your floor plan, billet size, and output target, and our engineers will propose a suitable JY model, a free plant layout drawing, and a detailed quotation. This is the standard first step for every project, and it carries no obligation.
Get a Customized Price Quote and Free Plant Layout
There is no generic aluminum extrusion press price because your press will be built to your specifications. Tell us your billet size, alloy, output target, and site conditions, and we will recommend the right JY model with a project quotation and a free plant layout drawing for your workshop.
Contact: David Liu, Email: [email protected] | WhatsApp: +86 13394110095 | Contact form
More guides and case studies are in our blog.